Douglas J. Hornbach
CEO, Lambda Research
Mr. Hornbach holds a B.S. in Engineering Mechanics from the University of Cincinnati
As a research engineer, Mr. Hornbach conducted many residual stress programs for the automotive, aerospace, nuclear, and power generation industries. He developed several novel services for the laboratory, including a mechanical ring-core residual stress method for coarse grain stainless steel weldments, finite element methods of predicting residual stress, and developing techniques for non-destructive subsurface residual stress measurement by x-ray diffraction.
As the laboratory supervisor, he managed the day-to-day activities of the residual stress laboratory. In addition to managing the laboratory, he was the project manager for several programs involving the development of the LPB®process for aerospace and medical applications. As the manager of these programs, he oversaw the design of the compressive residual stress, measurement of the residual stress, and validation of the fatigue strength improvement via testing, finite element and fracture mechanics. As CEO of Lambda Research, he is responsible for the overall operations of Lambda’s testing facilities, including the x-ray diffraction laboratory and the fatigue and corrosion characterization laboratory.
ENGINEERING SOCIETY AFFILIATIONS
Mr. Hornbach is a member of SAE, ASM, ASTM, and ASME. He serves as a member of the ASTM Committee E28.13 on Measurement Methods for Residual stress and SAE Committee A-5 Aerospace Landing Gear Systems.
- D. Hornbach, P. Prevey, M. Piche, D. Rivest, “The Influence of Surface Enhancement by Low Plasticity Burnishing on the Corrosion Fatigue Performance of 7475-T7351 and 2024-T351”, pp 381-387, Proceedings of 2008 10th International Conference On Shot Peening, Tokyo, Japan, Sept. 15-18.
- D. Hornbach, P. Prevey, “Reducing Corrosion Fatigue and SCC Failures in 300M Steel Landing Gear Using Low Plasticity Burnishing”, Paper No. 07ATC-104, Proceedings of 2007 SAE AeroTech Congress & Exhibition, Los Angeles, CA, Sept. 17-20, 2007, No. 270
- D. Hornbach, E. Loftus, “Application of Low Plasticity Burnishing (LPB®) to Improve the Fatigue Performance of Ti-6Al-4V Femoral Hip Stems”, Journal of ASTM International, Vol. 3, No. 5, No. 263
- D. Hornbach, P. Prevey, M. Blodgett, “Development of Nondestructive Residual Stress Profile Measurement Methods – The Integral Method”, Proceedings of the Review of Progress in Quantitative Nondestructive Evaluation, Vol. 24, July 25-30, 2004, Golden, CO
- D. Hornbach, P. Prevey, “The Effect of Prior Cold Work on Tensile Residual Stress Development in Nuclear Weldments,” Proceedings: 2001 ASME Pressure Vessels and Piping Conference, July 22-26, 2001, Atlanta, GA, No. 225
- D. Hornbach, P. Prevey, “Tensile Residual Stress Fields Produced in Austenitic Alloy Weldments,” Proceedings: Energy Week Conference, Book IV, January 28-30, Houston, TX, ASME International, 1997, No. 217
- R. McGregor, D. Hornbach, U. Abdelsalam, P. Doherty, “Experimental Residual Stress Evaluation of Hydraulic Expansion Transitions in Alloy 690 Steam Generator Tubing,” Proceedings of the Seventh International Symposium on Environmental Degradation of Materials in Nuclear Power Systems, Breckenridge, Colorado, August 7-10, 1995, No. 216