|
|
Diffraction Note Number |
Topic |
Diffraction Note, No. 1 |
Simultaneous Determination of Residual Stress and Hardness in Steels |
Diffraction Note, No. 2 |
X-Ray Diffraction Determination of Subsurface Cold Work Distributions |
Diffraction Note, No. 3 |
Principal Residual Stress Determination |
Diffraction Note, No. 4 |
Retained Austenite Measurement |
Diffraction Note, No. 5 |
Residual Stress Distributions in Inconel 600 Tubing |
Diffraction Note, No. 6 |
Pole Figure Determination |
Diffraction Note, No. 7 |
Application of X-ray Diffraction Residual Stress Measurement to Shot Peened Surfaces |
Diffraction Note, No. 8 |
Problems with Non-Destructive Surface X-ray Diffraction Residual Stress Measurement, Part 1 |
Diffraction Note, No. 9 |
Problems with Non-Destructive Surface X-ray Diffraction Residual Stress Measurement, Part 2 |
Diffraction Note, No. 10 |
Problems with Non-Destructive Surface X-ray Diffraction Residual Stress Measurement, Part 3 |
Diffraction Note, No. 11 |
Relocation of Lambda Research Corporate Headquarters and Expansion of Facilities |
Diffraction Note, No. 12 |
Quantitative Phase Analysis of Ceramic Coatings |
Diffraction Note, No. 13 |
Quantitative Analysis of Trace Amounts of Quartz and Cristobalite |
Diffraction Note, No. 14 |
Analysis of Radially Symmetric Textures Using Partial Pole Figures |
Diffraction Note, No. 15 |
Effect of Prior Machining on Residual Stress in Welds |
Diffraction Note, No. 16 |
The Identification of Crystalline Phases in Boiler Scale Deposits by X-Ray Diffraction |
Diffraction Note, No. 17 |
Finite Element Correction for Stress Relaxation in Complex Geometries |
Diffraction Note, No. 18 |
Customized Literature Search Services for X-ray Diffraction Applications & MaterialsTechnology |
Diffraction Note, No. 19 |
Residual Stress Contour Mapping |
Diffraction Note, No. 20 |
Automated Measurement of Subsurface Residual Stress Distributions |
Diffraction Note, No. 21 |
Lambda's Year in Review |
Diffraction Note, No. 22 |
Qualitative Phase Analysis of Nitrided Steels |
Diffraction Note, No. 23 |
Lambda's Year in Review, 1998 |
Diffraction Note, No. 24 |
Minimizing Distortion in Machining |
Diffraction Note, No. 25 |
Efficiently Optimizing Manufacturing Processes Using Iterative Taguchi Analysis |
Diffraction Note, No. 26 |
Effect of Low Plasticity Burnishing (LPB®) on the HCF Life of IN718 |
Diffraction Note, No. 27 |
Automated Surface and Subsurface Residual Stress Measurement for Quality Assurance of Shot Peening |
Diffraction Note, No. 28 |
The Effect of Prior Cold Working on the Development of Tensile Residual Stress Following Bulk Deformation |
Diffraction Note, No. 29 |
Characterization of Tensile Residual Stresses in 7050-T7651 Aluminum Friction Stir Welds |
Diffraction Note, No. 30 |
Fatigue Life Improvement and Mitigation of Pitting Corrosion Damage of Friction Stir Welded 2219-T8751 Aluminum Alloy by Low Plasticity Burnishing |
Diffraction Note, No. 31 |
Measurement of Residual Stresses Using Ring-Core Technique |
Diffraction Note, No. 32 |
Characterization of the residual stress, corrosion fatigue strength and stress corrosion cracking behavior in shot peened and low plasticity burnished 300M landing gear steel |
Diffraction Note, No. 33 |
Determination of Volume Percent Retained Austenite by X-Ray Diffraction |
Diffraction Note, No. 34 |
Use of Residual Compression by Design |
Diffraction Note, No. 35 |
Incremental Ring-core Determination of the Principal Residual Stress in a Duplex Stainless Steel Centrifuge |
Diffraction Note, No. 36 |
Residual Stress and Corrosion Fatigue Testing of 7076-T6 Propeller Blades |
Diffraction Note, No. 37 |
Residual Stress and Stress Corrosion Cracking Characterization of LPB® Treated 316L Stainless Steel Weldments |
Diffraction Note, No. 38 |
Fatigue Strength Restoration Using Compressive Residual Stress on High Strength Stainless Steel |
Diffraction Note, No. 39 |
The Influence of Compressive Residual Stress on the Corrosion Fatigue Performance of Stainless Steels |
|
|
|
|
